Lexmark C910 - Page 253

251
PCL SmartSwitch
Purpose:
To configure the printer so it automatically switches to PCL emulation when a print job received
through the infrared port requires it, regardless of the default printer language.
Values:
See also:
PS SmartSwitch; Printer Language
PS SmartSwitch
Purpose:
To configure the printer so it automatically switches to PostScript emulation when a print job received
through the infrared port requires it, regardless of the default printer language.
Values:
See also:
PCL SmartSwitch; Printer Language
On* Printer examines the data on the infrared interface and selects PCL emulation if the data
indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PostScript emulation to
process the job if PS SmartSwitch is On, or uses the default printer language specified in the
Setup Menu if PS SmartSwitch is Off.
On* Printer examines data on the infrared interface and selects PostScript emulation if the data
indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PCL emulation to process the
job if PCL SmartSwitch is On, or uses the default printer language specified in the Setup
Menu if PCL SmartSwitch is Off.