Maintenance
Ordering supplies
In the U.S. or Canada, call 1-800-438-2468 for information about Lexmark Authorized Supplies
Dealers in your area. In other countries/regions, contact the place where you bought your printer.
You can also visit the Lexmark online store at www.lexmark.com to order supplies.
Replacing maintenance items as needed helps you maintain top performance, optimize print quality,
and avoid printing problems.
Ordering a fuser
When the 80 Fuser Life Warning message appears on the display, you should order a new fuser.
Use P/N 56P9900 to order a fuser for a 120 V printer. Use P/N 56P9901 to order a fuser for a 230 V
printer.
Ordering an oil coating roll
When the 85 Coating Roll Life Warning message appears on the display, you should order a
new oil coating roll.
Use P/N 12N0774 to order an oil coating roll.
Ordering a transfer belt
When the 80 Belt Life Warning message appears on the display, you should order a new
transfer belt.
Use P/N 56P9903 to order a transfer belt.
Ordering a toner cartridge
When the 88 <color> Toner Low message appears on the display, you should order a new toner
cartridge. You can continue to print after the
88 <color> Toner Low message appears for a few
hundred pages until the print fades or no longer prints satisfactorily, or until the
88 <color>
Toner Empty message appears, at which time you must replace the toner cartridge to continue
printing.
Ordering supplies
136
To Next Page
Loading...
Need help?
General
