Maintenance
Replacing a photodeveloper
Your printer monitors the life of your photodevelopers. When a photodeveloper reaches the end of its
life, the printer displays
84 Black Photo Dev Exhausted or 84 Color Photo Devs Exhausted.
This message indicates it is time to replace one or more specified photodevelopers. For best print
quality, make sure you replace the fuser when the printer displays
84 Black Photo
Dev Life Warning or 84 Color Photo Dev Life Warning.
Press
Go to clear the message. The Supplies message appears on the second line of the display to
remind you that supplies need attention. You can open the Supplies Menu to see which
photodeveloper is nearly exhausted.
The printer continues to display the Supplies message until you replace the photodeveloper or until
it is exhausted.
To replace a photodeveloper, use the following steps or the instruction sheet supplied with the
photodeveloper.
Removing a photodeveloper
Note: If you need instructions on how to open the top cover, see Opening the top cover.
1 Complete the steps to open the top cover.
Note: The excess toner on the photodevelopers can soil clothing. Do not clean clothing
soiled with toner in hot water; this permanently adheres the toner to the clothing.
Use cold water to remove toner.
Replacing a photodeveloper
139
To Next Page
Loading...
Need help?
General
