Maintenance
7 Lift and remove the four shipping spacers from the transfer belt.
Note: If you do not remove the four shipping spacers from the transfer belt, you may not
be able to close the top cover.
Transfer belt
CAUTION: Before closing the top cover make sure everyone is away from the printer and the
area under the cover is free of hands, clothing, and other items.
8 Close the top cover and the front door.
9 Reconnect any optional devices to the printer.
10 Turn the optional devices on.
11 Turn the printer on.
The message Did you replace Belt? appears.
Replacing the transfer belt
164
To Next Page
Loading...
