Lexmark C925 - Page 28

Lexmark C925/X925 Color Product Study Guide Rev 2.3
For Training Purposes Only 6/21/2011
20
Fuser
The media passes the Fuser Entry Detection Sensor and enters the Fuser. Here, heat and pressure are
applied to the page to bond the image permanently to the media. The toner is impregnated with wax, so
it releases from the fuser rolls without the need of a wiper or oil coating roller. The Fuser Rollers
continue to feed the paper upward to the Fuser Exit Sensor and Fuser Exit Rolls.
Paper Exit
If the sheet is single-sided, the paper passes the Fuser exit Sensor and is fed into the standard bin by the
Exit Rolls.
Fuser Belt
Separator
Halo
g
en Heater
Press Roller
Thermistor 3
Thermostat
Fuser entr
y
g
ear
Fuser Entr
y
detectin
g
lever
Fuser Motor
Fuser Roller
Thermostat
Thermistor 2
(
at non drivin
g
side
)
Thermistor 1
(
at non drivin
g
side
)
Heated Roller
Halo
g
en Heater
Paper
Exit Roll
Paper
Pa
p
er Exit Sensor
Fuser Exit Roll
Paper