Lexmark CS820 Series User Manual

Upgrading and migrating
Hardware
Available internal options
• Memory card
– DDR3 DIMM
– Flash memory
• Fonts
– Application cards
• Forms and Bar Code
• PRESCRIBE
• IPDS
• Lexmark
TM
Internal Solutions Port (ISP)
– MarkNet
TM
N8360 (802.11 b/g/n/a wireless print server bundled with LEX‑M06‑001 Mobile Solutions
Module)
– IEEE 1284‑B Parallel Card
– RS‑232C Serial Card
Installing a memory card
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer o, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them o as well, and unplug any cables going into the
printer.
1 Turn
o
the printer, and then unplug the power cord from the electrical outlet.
2 Using a flat‑head screwdriver, remove the controller board access cover.
Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any controller board components or
connectors.
Upgrading and migrating 107

Lexmark CS820 Series Specifications

General

Print Technology	Color Laser
Print Resolution	Up to 1200 x 1200 dpi
Processor Speed	1.33 GHz
Output Capacity	Standard: 500 pages
Toner Cartridges	Black, Cyan, Magenta, Yellow
Display	4.3-inch color touch screen
Connectivity	USB, Ethernet
Maximum Paper Size	A4, Legal
Operating System Compatibility	Windows, macOS, Linux
First Page Out Time	As fast as 7 seconds
Print Speed	Simplex: Up to 60 ppm (Black/Color); Duplex: Up to 60 ppm (Black/Color)
Memory	Standard: 1024 MB / Maximum: 3072 MB