5 Unpack the staple finisher, and then remove the packing material.
6 Insert the staple finisher until it clicks into place.
7 Insert the staple finisher cover.
8 Close door A.
9 Turn on the printer.
Software
Installing the printer software
1 Obtain a copy of the software installer package.
2 Run the installer, and then follow the instructions on the computer screen.
3 For Macintosh users, add the printer.
Note: Obtain the printer IP address from the TCP/IP section in the Network/Ports menu.
Upgrading and migrating 119
To Next Page
Loading...
