Lexmark CS820 Series User Manual

Troubleshooting
Network connection problems
Embedded Web Server does not open
Action Yes No
Step 1
Check if you are using a supported browser:
• Windows Internet Explorer version 9 or later
• Macintosh Safari version 8.0.3 or later
• Google Chrome
• Mozilla Firefox
Is your browser supported?
Go to step 2. Install a supported
browser.
Step 2
Make sure that the printer IP address is correct.
View the printer IP address:
• From the home screen
• From the TCP/IP section in the Network/Ports menu
• By printing a network setup page or menu settings page,
and then finding the TCP/IP section
Note: An IP address appears as four sets of numbers separated
by periods, such as 123.123.123.123.
Is the printer IP address correct?
Go to step 3. Type the correct
printer IP address in
the address
field.
Note: Depending on
the network
settings, you may
need to type
“https://” instead
of “http://” before
the printer IP
address to access
the Embedded Web
Server.
Step 3
Check if the printer is on.
Is the printer on?
Go to step 4. Turn on the printer.
Step 4
Check if the network connection is working.
Is the network connection working?
Go to step 5. Contact your
administrator.
Step 5
Make sure that the cable connections to the printer and print server
are secure.
For more information, see the setup documentation that came with
the printer.
Are the cable connections secure?
Go to step 6. Tighten the cable
connections.
Troubleshooting 77

Lexmark CS820 Series Specifications

General

Print Technology	Color Laser
Print Resolution	Up to 1200 x 1200 dpi
Processor Speed	1.33 GHz
Output Capacity	Standard: 500 pages
Toner Cartridges	Black, Cyan, Magenta, Yellow
Display	4.3-inch color touch screen
Connectivity	USB, Ethernet
Maximum Paper Size	A4, Legal
Operating System Compatibility	Windows, macOS, Linux
First Page Out Time	As fast as 7 seconds
Print Speed	Simplex: Up to 60 ppm (Black/Color); Duplex: Up to 60 ppm (Black/Color)
Memory	Standard: 1024 MB / Maximum: 3072 MB