PPDS Emulation See “PPDS Emulation” on page 192.
Demo Mode See “Demo Mode” on page 193.
Factory Defaults See “Factory Defaults” on page 193.
Energy Conserve See “Energy Conserve” on page 194.
Auto Color Adj See “Auto Color Adjustment” on page 196.
Font Sharpening See “Font Sharpening” on page 197.
Exit Config Menu
This selection exits Configuration Menu, and Resetting the Printer
displays. The printer performs a POR and returns to normal mode.
Action for prompts
This setting enables users to determine which input source would receive paper-related or envelope-related change
prompts when they occur. Regardless of the target source, the device always requires some type of user assistance to
resolve the change prompt (examples: pushing a button to ignore the prompt and changing the source’s installed
media). However, this setting gives a user the option of having the device resolve change prompt situations without
requiring any user assistance.
To change this setting:
1 From the Configuration Menu, navigate to Action for prompts.
2 Touch Left or Right to change the setting.
3 Touch Submit to save the setting, or touch Back to return to the Configuration Menu without saving any changes.
When set to Prompt user, the device behaves like the past implementation. When a change prompt occurs, the device
stops printing, posts the change prompt to the target source, and waits for the user to select an action before continuing.
When set to Continue, the device automatically assumes that the user selects Continue every time a change prompt
is encountered. Likewise, when the device is set to Use Current, all change prompts will perform as if Use Current was
selected by the user.
ADF Edge Erase
The value of this setting determines the size in millimeters of the “no-print” zone around an ADF scan job.
To change this setting:
1 From the Configuration Menu, navigate to ADF Edge Erase.
2 Touch Left or Right to change the setting.
3 Touch Submit to save the setting, or touch Back to return to the Configuration Menu without saving any changes.
7527
Service menus
190