2-40 Service Manual
4513-630, -63W, -6EW
7
Re-attach the communications cable.
Restart the printer to operating mode.
Send the printer a print job.
Does the 900.xx error reoccur?
Note: Before performing this step, write
down this information about the file being
sent to the printer:
• Application used
• Operating system
•Driver type
• File type (PCL, PostScript, XPS, etc.)
Go to step 8. Go to step 10.
8
Restart the printer to operating mode.
Send a different print job to the device.
Does the 900.xx error reoccur?
Go to step 9. Go to step 10.
9
Upgrade the firmware. Contact your next
level of support for the correct firmware
level to use.
Restart the printer to operating mode.
Send the printer a print job.
Does the 900.xx error reoccur?
Go to step 31. Go to step 10.
10
Is the device a Multi Function Printer? Go to step 11. Go to step 13.
11
Run a copy job.
Does the 900.xx error reoccur?
Go to step 31. Go to step 12.
12
Run a scan to PC job.
Does the 900.xx error reoccur?
Go to step 31. Go to step 13.
13
Is there optional memory installed? Go to step 14. Go to step16.
14
Reinstall the memory, and send a print job
to the device.
Does the 900.xx error reoccur?
Go to step 15. Go to step 16.
15
Install a Lexmark recommended memory
option. Send a print job to the device.
Does the 900.xx error reoccur?
Go to step 31. Problem resolved.
16
Is there a modem installed on the device? Go to step 17. Go to step 21.
17
Reinstall the modem. Restart the device.
Does the 900.xx error reoccur?
Go to step 18. Go to step 20.
18
Upgrade the firmware. Contact your next
level of support for the correct firmware
level to use.
Restart the printer to operating mode.
Send the printer a print job.
Does the 900.xx error reoccur?
Go to step 19. Problem resolved.
19
Replace the modem. Restart the device.
Does the 900.xx error reoccur?
Go to step 31. Problem resolved.
20
Run a fax job.
Does the 900.xx error reoccur?
Go to step 31. Go to step 21.
Step Action and questions Yes No