Lexmark E460DN - Configuration Menu (CONFIG MENU); Entering Configuration Menu; Available Menus

3-2 Service Manual
4513-630, -63W, -6EW
Configuration menu (CONFIG MENU)
Entering Configuration Menu
1. Turn off the printer.
2. Press and hold and .
3. Turn on the printer.
4. Release the buttons when the clock displays.
Available menus
The menus display on the operator panel in the order shown:
Note: Menus may vary depending on the features and options of the printer.
Maintenance Count Value See “Maintenance Count Value (Maint Cnt Value)” on page 3-3.
Reset Maintenance Count See “Reset Maintenance Count Value (Reset Maint Cnt)” on
page 3-3.
Reset Photoconductor Maintenance
Count
See “Reset Photoconductor Maintenance Counter (Reset PC
Cnt)” on page 3-3.
Print Quality Pages See “Print Quality Pages” on page 3-3.
Reports See “Reports” on page 3-4.
Panel Menus See “Panel Menus” on page 3-4.
PPDS Emulation See “PPDS Emulation” on page 3-4.
Demo Mode See “Demo Mode” on page 3-4.
Factory Defaults See “Factory Defaults” on page 3-4.
Action for Prompts See “Action For Prompts” on page 3-5.
Energy Conserve See “Energy Conserve” on page 3-5.
Font Sharpening See “Font Sharpening” on page 3-5.
Exit Config Menu See “Exit Configuration Menu (Exit Config Menu)” on page 3-5.