49
5
Align the cartridge with the latches inside the printer.
6 Lower the cartridge until the latches snap over the cartridge as shown.
7 Reinstall the manual feeder (or multipurpose feeder).
The printer requires several minutes to warm up. After it completes its internal tests, the
Ready
message appears on the operator panel.
If you do not replace the PerfectFinish cartridge, you must press
Go each time you
print a job. Remember, you lose the print quality of coated paper until you replace
the PerfectFinish cartridge.
Latch
Latch
To Next Page
Loading...
