How to resolve 'Paper loading messages' on Lexmark MS310 Printer?
To resolve 'Paper loading messages' on a Lexmark Printer, load the tray or feeder with the correct size and type of paper. Also, make sure the correct paper size and type are specified in the Paper menu.
Why does my Lexmark MS310 Printer say 'Non-Lexmark cartridge, see User’s Guide [33.xy]'?
The message 'Non-Lexmark cartridge, see User’s Guide [33.xy]' appears because using third-party supplies or parts may affect the performance, reliability, or life of the printer. You can press to accept the risks and proceed with non-genuine supplies.
What does 'Insufficient memory to collate job [37]' mean on Lexmark MS310?
The message 'Insufficient memory to collate job [37]' on your Lexmark Printer means the printer does not have enough memory to collate the entire print job. You can press on the printer control panel to print the portion of the job already stored and begin collating the rest, or you can press to cancel the print job.
How to fix 'Too many trays attached [58]' error on Lexmark MS310 Printer?
To resolve the 'Too many trays attached [58]' error on your Lexmark printer, first turn off the printer. Then, remove the extra tray or trays.
What to do if my Lexmark Printer says 'Close front door'?
If your Lexmark Printer displays the message 'Close front door', it means that the front door of the printer is open. Close the front door of the printer.
Essential warnings and guidelines to prevent injury and damage during printer use.
Procedures for installing and configuring the printer's software on your computer.
Step-by-step instructions for loading paper into trays and the multipurpose feeder.
Guidance on ordering and replacing consumables like toner and imaging units.
Step-by-step instructions for clearing jams from various areas like front door, rear door, and trays.
Interpreting printer control panel lights to diagnose issues.
Troubleshooting common messages related to toner and imaging units.
Resolving errors related to incorrect paper loading or settings.
Troubleshooting network, memory, and software-related errors.
Diagnosing and fixing issues like blank pages, clipped images, and streaks.
Step-by-step solutions for basic printer issues like unresponsiveness.
Information on how to get technical assistance from Lexmark.
General| Print Technology | Monochrome Laser |
|---|---|
| Print Speed (Black) | Up to 35 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | Up to 50, 000 pages |
| Standard Memory | 128 MB |
| Processor Speed | 800 MHz |
| Paper Input Capacity | 250 sheets |
| Operating Systems Supported | Windows, Mac, Linux |
| Connectivity | Ethernet |
| Maximum Paper Capacity | 850 sheets |
To Next Page
