Lexmark Multifunction Laser - E-mail Service and Address Book Setup; E-mail Server Configuration; Address Book Setup Procedure

E-mail server setup
35
E-mail
E-mail server setup
For e-mail to operate, it must be turned on in the MFP configuration and have a valid IP address or gateway address. To set
up the e-mail function:
1 Open your Web browser. In the address line, enter the IP address of the MFP you want to configure using the
format: http://ip_address/.
2 Click Configuration.
3 Click E-mail/FTP Settings.
4 Click E-mail Server Setup.
5 Fill in the fields with the appropriate information.
6 Click Submit.
Address book setup
1 Open your Web browser. In the address line, enter the IP address of the MFP you want to configure using the
format: http://ip_address/.
2 Click Configuration.
3 Click E-mail/FTP Settings.
4 Click Manage E-mail Shortcuts.
5 Fill in the fields with the appropriate information.
6 Click Add.