Lexmark Multifunction Laser - Printing the Menu Settings Page; Printing a Network Setup Page; Printing a Font Sample List; Printing a Directory List

Printing the menu settings page
52
Printing
Printing the menu settings page
You can print a menu settings page to review the default MFP settings and to verify the MFP options are installed correctly.
1 Make sure the MFP is on and the Ready message appears.
2 Touch the menu button on the control panel.
3 Touch Reports.
4 Touch Menu Settings Page.
Printing a network setup page
You can print a network setup page to review the default MFP settings and to verify the MFP options are installed correctly.
1 Make sure the MFP is on and the Ready message appears.
2 Touch the menu button on the control panel.
3 Touch Reports.
4 Touch Network Setup Page.
Printing a font sample list
To print samples of the fonts currently available for the MFP:
1 Make sure the MFP is on and the Ready message appears.
2 Touch the menu button on the control panel.
3 Touch Reports.
4 Touch the down arrow until Print Fonts appears, then touch Print Fonts.
5 Touch PCL Fonts or PostScript Fonts.
Printing a directory list
A directory listing shows the resources stored in flash memory or on the hard disk. To print a listing:
1 Make sure the MFP is on and the Ready message appears.
2 Touch the menu button on the control panel.
3 Touch Reports.
4 Touch the down arrow until Print Directory appears, then touch Print Directory.