2-124 Service Manual
4061-xx0
POST incomplete—stapler cycles several times
990.xx Service Error Code—Check Bin x displayed—POST incomplete
•
“Step1—During POST the stapler option does not try to home” on page 2-124.
• “Step 2—During POST the stapler option tries to home” on page 2-124.
Step1—During POST the stapler option does not try to home
Replace the stapler option.
Step 2—During POST the stapler option tries to home
Replace the stapler option.
281.xx Paper Jam
—paper feeds partway into the standard bin even if finisher is
selected
Note: When a 900.xx Service Error is displayed during POST, the failure is usually in the stapler gearbox
assembly or stapler cartridge.
Replace the stapler option.
281.xx Paper Jam
—The paper may jam at the upper deflector
Replace the stapler option.
281.xx Paper Jam
—paper jams into stapler output bin
Replace the stapler option.
282.xx Staple Jam—Check Stapler
displays
FRU Action
1 Stapler assembly Replace the stapler assembly.
Note: When replacing the stapler assembly, observe the location of
the ground lead from the stapler assembly and the finisher frame.
Make sure the ground lead is correctly reattached.
FRU Action
1 Stapler assembly Check the stapler assembly for broken or damaged parts.
To Next Page
Loading...
