Appendix A—Options and features A-11
4061-xx0
Replacing the shield
After you have installed options on the printer system board, follow these steps to reattach the shield and close
the doors.
1. Align the keyholes on the shield with the screws on the frame.
2. Slide the shield down onto the screws.
3. Tighten the six screws (A).
4. Close the side door.
5. Close the top front cover.
6. Close the multipurpose feeder.
Printing and using features
Canceling a print job
There are several methods for canceling a print job.
• Canceling a job from the printer operator panel. See “Canceling a job from the printer operator panel”
on page A-12
• Canceling a job from a computer running Windows. See “Canceling a job from a computer running
Windows” on page A-12.
– Canceling a job from the taskbar.
– Canceling a job from the desktop
• Canceling a job from a Macintosh computer. See “Canceling a job from a Macintosh computer” on
page A-12.
– Canceling a print job from a computer running Mac OS 9.
– Canceling a job from a computer running Mac OS X.
A
To Next Page
Loading...
