Lexmark T640 - Paper Alignment Assembly Removal

4-70 Service Manual
4061-xx0
Paper alignment assembly removal
1. Remove the upper paper deflector assembly. See “Upper paper deflector assembly removal” on
page 4-80.
2. Remove the inner paper deflector assembly. See “Inner paper deflector assembly removal” on
page 4-48.
3. Release the input paper sensor from its mounting, and remove.
4. Remove the left door.
5. Remove the paper alignment assembly mounting screws (A).
6. Locate the paper alignment assembly reference adjustment screw (B) through the left frame, and remove
the screw.
7. Remove the paper alignment assembly.
Note: Do the “Paper alignment assembly adjustment” on page 4-3 when you reinstall the assembly.
B