Diagnostic information 2-35
4061-xx0
Insert <tray><tray>=Tray 1, Tray 2, Tray 3, Tray 4, or Tray 5.
The printer detects a tray needs to be inserted. The printer does not continue
until it detects the tray is inserted.
Note: This situation usually occurs when the tray is refilled during a job. To
refill a tray during a printing session, press and wait for pages to reach
the output bin before refilling the tray.
The following actions may be taken:
• Insert the requested tray.
• Press until Busy/Waiting displays. The following selections are
available:
-Cancel Job
- Reset Printer
- Reset Active Bin
If the message cannot be cleared, go to “Paper size sensing service
check” on page 2-113 or “Input tray(s) service check” on page 2-102.
Install Bin x
or Cancel Job
Bin x=Bin 1, Bin 2, or Bin 3.
This message is displayed when a paper handling option has been hot
unplugged. The printer requires the reinstallation of the option to print a page
which has been formatted by the interpreter before the option was removed.
The following actions may be taken:
• Install the option.
• Press until Busy/Waiting displays. Select one of the following:
-Cancel Job
- Reset Printer
- Reset Active Bin
If the message cannot be cleared, go to “Input tray(s) service check” on
page 2-102.
Install Duplex
or Cancel Job
This message is displayed when a duplex option has been hot unplugged.
The printer requires the reinstallation of the option to print a page which has
been formatted by the interpreter before the option was removed.
The following actions may be taken:
• Install the duplex option.
• Press until Busy/Waiting displays. Select one of the following:
-Cancel Job
- Reset Printer
- Reset Active Bin
If the message cannot be cleared, go to “Duplex option service check” on
page 2-82.
User attendance messages (continued)
Error
code
Sub
code
Primary message Description/action
To Next Page
Loading...
