Lexmark X466 - Maxicode Special Function Parameter Support; PDF417 Special Function Parameter Support; QR Code (Quick Response Code)

D.2 MaxiCode Special Function Parameter Support
These values are found in the Bar Code Symbol Data. A description of the supported values may be found
in the ”Bar Code Object Content Architecture (BCOCA) Reference” (publication S544-3766-05).
Offset Name Supported Values
Byte 5 Bit 0 EBCDIC B’0’, B’1’
Byte 5 Bit 1 Escape Sequence Handling B’0’, B’1’
Byte 6 Symbol Mode X’02’ – X’05’
Byte 7 Sequence Indicator X’00’ – X’08’
Byte 8 Total Symbols X’00’, X’02’ – X’08’
Byte 9 Bit 0 Zipper B’0’, B’1’
D.3 PDF417 Special Function Parameter Support
These values are found in the Bar Code Symbol Data. A description of the supported values may be found
in the ”Bar Code Object Content Architecture (BCOCA) Reference” (publication S544-3766-05).
Offset Name Supported Values
Byte 5 Bit 0 EBCDIC B’0’, B’1’
Byte 5 Bit 1 Escape Sequence Handling B’0’, B’1’
Byte 6 Data Symbols X’01’ – X’1E’
Byte 7 Rows X’03’ – X’5A’, X’FF’
Byte 8 Security X’00’ – X’08’
Byte 9 – 10 Macro Length X’0000’ – X’7FED’
Byte 11 Macro Data Values as defined in BCOCA Reference
Version 4.
D.4 QR Code (Quick Response Code)
These values are found in the Bar Code Symbol Data. A description of the supported values may be found
in the ”Bar Code Object Content Architecture (BCOCA) Reference” (publication S544-3766-05).
Offset Name Supported Values
Byte 5 Bit 0 EBCDIC B’0’, B’1’
Byte 5 Bit 1 Escape Sequence Handling B’0’, B’1’
Byte 6 EBCDIC code page X’00’ – X’03’
Byte 7 Version X’00, X’01 – X’28’
Byte 8 Error correction level X’00’ – X’03’
Byte 9 Sequence indicator X’00’ – X’10’
Byte 10 Total symbols X’00’ or X’02’ – X’10’
Byte 11 Parity Data X’00’ – X’FF’
Byte 12 Bit 0 UCC/EAN FNC1 B’0’, B’1’ see below
Byte 12 Bit 1 Industry FNC1 B’0’, B’1’ see below
Byte 13 Application indicator Dependent on Byte 12 (special-function flags).
See below
Byte 12 Bit 0 and 1, special-function flags
The special-function flags in Byte 12 specify special functions that can be used with a QR Code symbol.
Bits 0 and 1 are alternate data type identifiers. Exception condition EC-0F11 exists if an incompatible
combination of the two bits in Byte 12 is specified.
108