Lexmark X466 - 5 Finishing Support

5 Finishing Support
Finishing support includes offset stacking and stapling.
The table below shows the finishing support provided with your printer and finishing support when an
optional finisher is installed. Finishing support may not apply to all media sizes. The finishing functions
may not apply to all media sizes. When a function can not be applied to a specific media, the job will
print but finishing functions will not be performed. Refer to your printer documentation for media size
support of these functions.
Finishing functions for all products except Lexmark X860de, X862de and X864de:
Function/
Support
Hole
Punch
Offset
Stacking
Stapling Staple
position
Maximum
Staple Packet
Size*
Lexmark C734
Lexmark C736
- - - - -
Lexmark T650
Lexmark T652
Lexmark T654
Lexmark T656dne
– Optional
Finisher
Optional
Finisher
Single
(Top Left)
50 Sheets
Lexmark W850
Finisher
Physical
Bin 2
Std Bin,
Finisher
Physical
Bin 2
Finisher
Physical
Bin 2
Front
Dual
Rear
50 Sheets
Lexmark E460dn, E460dw
Lexmark E462dtn
Lexmark X463de
Lexmark X464de
Lexmark X466dte, X466dtwe
- - - - -
Lexmark X658de **
– Finisher Finisher Single
(Top Left)
50 Sheets
Lexmark X651de
Lexmark X652de
Lexmark X654de
Lexmark X656de
– – – – –
Lexmark X734de
Lexmark X736de
Lexmark X738de
- - - - -
* Assumes 20 lb. plain letter sheets
** Selected output modules are normally ordered with the printer model and may not be available
separately.
“–“ Indicates not supported.
48