Lexmark X466 - Example: Changing a Numerical Setting

8. When you are finished, exit by pressing to return to the Ready screen. You may need to press
it several times until Ready appears.
2.2.3 Example: Changing a Numerical Setting
Example: If you select Option Card Menu > IPDS MENU > MARGINS > TRAY1 ADJUST > Top
Margin, you see the following display:
Top Margin

0

You can either use the numeric pad or the navigation buttons
to decrease a value or  to increase
the value. Press to save the desired value.
When the setting is saved, the display will revert to the previous menu level.
MARGINS
9 Top Margin
Left Margin
Top Margin Back
Some numerical values contain more than one field. For example, Option Card Menu > IPDS MENU >
EMULATION Default CPI.
Default CPI

10
. 0

The value before the decimal point and the value after the decimal point are set independently of each
other. Use the navigation buttons
to move between the fields. The currently editable field is
marked with above the field and below it.
Default CPI

10
. 0

13