Lexmark X466 - Saved Option Changes Become Active on New Session; Printing the Menu Settings Page (Mfps)

2.3.4 Saved Option Changes Become Active on New Session
All saved settings will become active on the next IPDS host session.
If the printer IPDS Timeout is NOT set to “Host Controlled” (Menus > Option Card Menu > IPDS
MENU > EMULATION > IPDS Timeout = “Host Controlled”), power the printer OFF and ON to
activate the new settings. For more information on IPDS Timeout, see page 27.
2.3.5 Printing the Menu Settings Page (MFPs)
1.
. Make sure the printer is powered ON and the Ready message appears. 1
2. Touch (Menus).
3. Scroll down
if necessary, then touch Reports.
4. Now you will see a list of items. Scroll down if necessary, then touch Menu Settings Page.
5. The message Printing Menu Settings Page is displayed.
6. The printer returns to Ready state after the list of current active settings prints.
17