Lexmark X466 User Manual

93Operations - TN3270E SETUP: NETWORK SETUP > Connect Status
Reconnecting session The Telnet session was disconnected. The SCS/TNe Emulation is
attempting to reconnect.
Session Disconnected and Halted All active Telnet sessions have been disconnected. Power the
printer Off and On or select Menus > Option Card Menu > SCS/
TNe MENU > COMMON SETUP > Reset TN Session > Reset TN
Ses. to reconnect.
Trying to connect The SCS/TNe Emulation is contacting the host or SNA Server to
establish a TCP/IP connection.
Connect Status: Last response messages Comments
Lst Rsp:No support for that device-type The Telnet server does NOT support the device type requested by
the SCS/TNe Emulation. Select another device type with the Device
Type option.
Lst Rsp:Name unknown to server The LU Name requested by the SCS/TNe Emulation is unknown to
the server or not correctly configured. Check the configuration of
the host and of the SCS/TNe Emulation.
Lst Rsp:The requested device is in use The device requested by the SCS/TNe Emulation is used by
another device. Check the configuration of the host and of the SCS/
TNe Emulation.
Lst Rsp:Terminal/Printer name mismatch The device name or resource name requested by the SCS/TNe
Emulation is incompatible with the requested device type. Change
the device name or device type on the host or check the configu-
ration of the host and of the SCS/TNe Emulation.
Connect Status: Primary status messages Comments

Lexmark X466 Specifications

General

Print Resolution	1200 x 1200 dpi
Processor Speed	400 MHz
Fax Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Operating System Compatibility	Windows, Mac, Linux
Print Technology	Laser
Duplex Printing	Yes
Connectivity	USB, Ethernet
Paper Handling	250-sheet input tray, 50-sheet multipurpose tray
Scanner Type	Flatbed, ADF
Scan Resolution	1200 x 1200 dpi
Type	Multifunction
Paper Capacity	300 sheets
Maximum Paper Size	8.5 x 14 inches