Lexmark X466 - PAPER HANDLING Menu - Option Descriptions; Offset Stacking; Universal Size

3.4 PAPER HANDLING Menu – Option Descriptions
In the following an asterisk “*” indicates the default factory value. Values only display when they are
available on your printer. The selected value for each of these options can be printed; see Printing the
Menu Settings Page (printers) on page 14 or Printing the Menu Settings Page (MFPs) on page 17.
3.4.1 Offset Stacking
This option controls the offset stacking function. It is only displayed when offset stacking is supported in
the printer standard bin or when an optional bin with offset stacking capability is installed. Offset stacking
is only available in selected bins and may be limited to selected media.
Bin selection has a higher priority than offset stacking commands in the IPDS job. The job must be routed
to a bin that supports offset stacking and have offset stacking specified in the job before offset stacking
will be performed.
See section 5.1 on page 50 for additional information on offset stacking.
Host Controlled*
Offset stacking is controlled by the commands received in the IPDS job.
Disabled
Offset stacking is not performed. Offset stacking commands received in the IPDS
jobs are ignored.
3.4.2 UNIVERSAL SIZE
The IPDS emulation uses the paper size setting specified in the printer menu to determine the size loaded.
The paper size is returned to the host. A printer paper size of “Universal” is displayed in the printer menu
when a non-standard size paper is detected in an auto size sensing tray or is selected as the paper size
loaded into a non-size sensing tray or feeder.
This option allows you to specify the physical paper size returned to the host when a non-standard paper
size is loaded. The paper size is specified in 300 dots per inch.
Important: A 34 Incorrect Media, or paper jam message may be displayed if printing occurs past the
length of the physical paper. You should specify the actual paper size to avoid errors.
Product Menu Option
V
alue Range Function
Lexmark C734
Lexmark C736
Lexmark X734de
Lexmark X736de
Lexmark X738de
UNIVERSAL SIZE >
Paper Length
4200*,
900 to 6824
Specifies Universal
paper size dimensions.
See notes below.
UNIVERSAL SIZE >
Paper Width
2550*,
900 to 2550
Lexmark E460dn, E460dw
Lexmark E462dtn
Lexmark T650
Lexmark T652
Lexmark T654
Lexmark T656dne
Lexmark X463de
Lexmark X464de
Lexmark X466dte, X466dtwe
Lexmark X651de
Lexmark X652de
Lexmark X654de
Lexmark X656de
Lexmark X658de
UNIVERSAL SIZE >
Paper Length
4200*,
900 to 4251
UNIVERSAL SIZE >
Paper Width
2550*,
900 to 2550
30