F. Memory Requirements and Recommendations
Additional memory above the minimum recommended may be required for printing DBCS characters,
TrueType fonts, complex mono or color IPDS jobs or if printer memory is used to save other emulation
resources or hold other emulation jobs for later printing.
In the tables below, you will see that some values apply when ”saving of IPDS resources” is activated.
Activation requires that the host timeout and printer IPDS Timeout values are properly set (refer to page
27 section 3.3.16 IPDS Timeout” for more information).
Optional installed memory is listed under the Installed Features section on the print menu page. Total
installed memory (standard memory + installed feature memory) is listed under the Device Information
section on the print menu page (see Printing the Menu Settings Page (printers) on page 14 or Printing the
Menu Settings Page (MFPs) on page 17.)
Lexmark C734, C736 (standard 256MB):
IPDS print resolution Job attributes Recommended optional memory
4800 Color Quality Simplex/Duplex -
4800 Color Quality Simplex and saving IPDS resources 256MB
4800 Color Quality Duplex and saving IPDS resources 256MB
4800 Color Quality DBCS, TrueType, Complex Jobs 256MB
1200 dpi Simplex/Duplex 512MB
1200 dpi Simplex and saving IPDS resources 512MB
1200 dpi Duplex and saving IPDS resources 512MB
1200 dpi DBCS, TrueType, Complex Jobs 512MB
Lexmark E460dn, E460dw, E462dtn
(standard 64MB. A minimum of 256MB is required for IPDS Support):
IPDS print resolution Job attributes Recommended optional memory
600 dpi/1200 Image Q Simplex/Duplex 256MB or more required
600 dpi/1200 Image Q Simplex and saving IPDS resources 256MB
600 dpi/1200 Image Q Duplex and saving IPDS resources 256MB
600 dpi/1200 Image Q DBCS, TrueType, Complex Jobs 512MB
1200 dpi/2400 Image Q Simplex/Duplex 512MB
1200 dpi/2400 Image Q Simplex and saving IPDS resources 512MB
1200 dpi/2400 Image Q Duplex and saving IPDS resources 512MB
1200 dpi/2400 Image Q DBCS, TrueType, Complex Jobs 728MB
111
To Next Page
Loading...
