Finishing functions for Lexmark X860de, X862de and X864de.
The finishing functions may not apply to all media sizes. When a function can not be applied to a specific
media, the job will print but finishing functions will not be performed.
Function/
Support with
Optional Finisher
Hole
Punch
Offset
Stacking
Staple
Bin
Staple
position
Maxi-
mum
Staple
Packet
Size*
Center
Fold
(See Note)
Saddle
Staple
(See Note)
Lexmark X860de
Lexmark X862de
Lexmark X864de
Finisher
Physical
Bin 2
Std,
Finisher
Physical
Bin 2
Finisher
Physical
Bin 2
Front
Rear
Dual
50
Sheets
Finisher
Physical
Bin 3
(Advanced
Finisher
only)
Finisher
Physical
Bin 3
(Advanced
Finisher
only)
* - 20 lb. plain letter paper
Note: Two optional finisher units are supported. The Standard Finisher has two bins and does not
support Center Fold-in or Saddle staple (Saddle stitch-in). The Advanced Finisher supports all
listed finishing functions. Letter and A4 paper must be loaded Short Edge Feed (SEF) for Center
fold-in and Saddle stitch-in to be performed.
49
To Next Page
Loading...
