Lexmark X466 - Page 99

Type Bar Code Type Mod Description
X’04’
X’05’
X’06’
X’07’
X’08’
X’09’
The first check digit is generated using the NCR modulo-11
algorithm, the second using the IBM modulo-10 algorithm. The
first check digit equals the remainder; error (exception condition
EC-0E00) exists if the first check-digit calculation results in a
value of 10.
The first check digit is generated using the IBM-modulo-11
algorithm, the second using the IBM modulo-10 algorithm. The
first check digit equals the remainder. Exception condition EC-
0E00 exists if the first check-digit calculation results in a value
of 10.
The first check digit is generated using the NCR-modulo-11
algorithm, the second using the IBM modulo-10 algorithm. The
first check digit equals 11 minus the remainder. A first check
digit value of 10 is assigned the value zero.
The first check digit is generated using the IBM-modulo-11
algorithm, the second using the IBM modulo-10 algorithm. The
first check digit equals 11 minus the remainder. A first check
digit value of 10 is assigned the value zero.
The first check digit is generated using the NCR-modulo-11
algorithm, the second using the IBM modulo-10 algorithm. The
first check digit equals 11 minus the remainder. Exception
condition EC-0E00 exists if the first check-digit calculation
results in a value of 10.
The first check digit is generated using the IBM-modulo-11
algorithm, the second using the IBM modulo-10 algorithm. The
first check digit equals 11 minus the remainder. Exception
condition EC-0E00 exists if the first check-digit calculation
results in a value of 10.
X’03’ UPC/CGPC
Version A
(BCD1)
X’00’ Print the standard UPC-A bar code with a generated check digit.
The data to be encoded consists of eleven digits. The first digit is
the number-system digit; the next 10 digits are the article
number.
X’05’ UPC/CGPC
Version E
(BCD1)
X’00’ Print a UPC-E bar code symbol. Of the 10 input digits, six digits
are encoded. The check digit is generated using all 10 input data
digits. The check digit is not encoded; it is used only to assign
odd or even parity to the six encoded digits.
X’06’ UPC 2-Character
(Two-digit)
Supplemental
X’00’
Print a UPC two-digit supplemental bar code symbol (bar/space
pattern and HRI). This option assumes that the base UPC
Version A or E symbol is presented as a separate bar code
99