Lexmark X644E - Non-Print Char (IDB Option 3)

107Operations - TN3270E SETUP: MISC SETTINGS > Non-Print Char (IDB Option 3)
Non-Print Char
(IDB Option 3)
This SCS Options > MISC Settings option defines the replacement
character to substitute for an unprintable character found in the data
stream. Refer to “Appendix B - ASCII Character Table” on page 280
for a complete list of printable characters and their values.
Advanced IDB language to set factory default:
&%IDB_EDIT: OPTION 3:45:EXIT
Option Value IDB Value
ASCII Value 45 * 45
ASCII Value
[0..255]
0 - 255