Lexmark X644E - IDB Delimiter (IDB Option 7)

195Operations - TN5250E SETUP: SCS OPTIONS > IDB Delimiter (IDB Option 7)
IDB Delimiter
(IDB Option 7)
This SCS Options > CSC Characters option defines the delimiter
used in the User IDB and Advanced IDB command languages to
separate programming commands.
The IDB option value is an ASCII character in the decimal range 33
- 126. Refer to “Appendix B - ASCII Character Table” on page 280
for a complete list of characters and their values.
User IDB command:
Not supported
Parameter:
Not supported
User IDB language to set factory default:
Not supported
Advanced IDB language to set factory default:
&%IDB_EDIT: OPTION 7:58:EXIT
Option Value IDB Value User IDB parameter
: * 58 [colon] Not supported