183Operations - TN5250E SETUP: SCS OPTIONS > Move Hor/Ver (IDB Option 158)
Move Hor/Ver
(IDB Option 158)
This SCS Options option determines how horizontal and vertical
moves are performed. Refer to the IDB options 211 - 213 if escape
sequences (ESC) are used for horizontal movement and to option
238 if spaces (SP) are used.
User IDB command:
HORMOV / VERMOV <parameter>:
Parameter:
For HORMOV ESC uses escape sequences; SP uses spaces
For VERMOV ESC uses escape sequences; LF uses line feeds
User IDB language to set factory default:
&%IDB_EDIT: HORMOV ESC: VERMOV ESC:EXIT
Option Value IDB Value User IDB parameter
Use Line feed 0 HORMOV SP: VERMOV LF
Use Escape * 1 HORMOV ESC: VERMOV ESC
Space + Escape 2 HORMOV SP: VERMOV ESC
Linefeed + Esc 3 HORMOV ESC: VERMOV LF
To Next Page
Loading...
