Lexmark X644E - Tray2 Paper Size (IDB Option 91)

144Operations - TN3270E SETUP: SCS Options > PAPER SETTINGS > Tray2 Paper Size (IDB Option 91)
Tray2 Paper Size
(IDB Option 91)
This SCS Options > Paper Settings option specifies the paper size
to be used when Source Input (IDB Option 113) Tray 2 is selected
and the APO/COR function has been activated. This paper size is
used to determine the print area for rotations of job text. See the
COR/APO Sett (IDB Option 122) option.
NOTE: If the SCS options are restored to non-US factory defaults,
the default value of this option changes to A4. See the
SCS3270 Defaults option.
Advanced IDB language to set factory default:
&%IDB_EDIT: OPTION 91:2:EXIT
Option Value IDB Value
A4 0
B5 1
Letter * 2 See note below.
Legal 3