185Operations - TN5250E SETUP: SCS OPTIONS > Format Ctrl Sup (IDB Option 177)
Format Ctrl Sup
(IDB Option 177)
This SCS Options option is used for enabling and disabling the
"Auto newline" feature of the SCS/TNe Emulation. If the printout is
incorrectly double spaced, disabling it will in most cases solve the
problem.
User IDB command:
CTLCODSUP <parameter>:
Parameter:
OFF, ON
User IDB language to set factory default:
&%IDB_EDIT: CTLCODSUP ON:EXIT
Advanced IDB language to set factory default:
&%IDB_EDIT: OPTION 177:0:EXIT
Option Value IDB Value User IDB parameter
Enabled * 0ON
Disabled 1OFF
To Next Page
Loading...
