Lexmark X644E - Storing the IDB Configuration File

256IDB Basics: Storing the IDB Configuration File
Storing the IDB
Configuration File
When the IDB configuration file has been edited it can be down-
loaded to the SCS/TNe Emulation.
The download file name is fixed. Downloading a file with a different
name will result in an unreadable printout. No IDB settings will be
changed.
The procedure below uses a Microsoft FTP client.
To store the IDB settings file
1 Start a FTP session.
User name: <Blank>
2 Enter the "/lti" directory.
cd /lti
3 Set the FTP client to binary mode. This is necessary as data
is transferred in binary mode.
binary
ftp 201.1.12.123
(Sample IP address)