Lexmark X644E - Form Strings (IDB Option 168)

123Operations - TN3270E SETUP: MISC SETTINGS > Form Strings (IDB Option 168)
Form Strings
(IDB Option 168)
This SCS Options > MISC Settings option defines the lead in char-
acter for the Formatted String Utility.
IMPORTANT:
Avoid using a character between 0 - 9 (ASCII 49
- 57), A - F (ASCII 65 - 70). Also, avoid using one
of the characters used as lead in for one of the
other CSC commands.
The lead in character is an ASCII character in the decimal range 0 -
255. Refer to “Appendix B - ASCII Character Table” on page 280 for
a complete list of printable characters and their values.
Advanced IDB language to set factory default:
&%IDB_EDIT: OPTION 168:0:EXIT
Option Value IDB Value Comments
ASCII Value 0 * 0 Disable the Formatted String
Utility.
ASCII Value
[1..255]
1 - 255