202Operations - TN5250E SETUP: SCS OPTIONS > COR/APO SETTINGS > COR Action 2 (IDB Option 124)
When the Disable STO function is selected, all STO commands in
the data stream are ignored, i.e. all text orientation commands.
User IDB command:
CORDRW 2 <parameter>:
Parameter:
OFF, APO, COR, STODIS
User IDB language to set factory default:
&%IDB_EDIT: CORDRW 2 COR:EXIT
Advanced IDB language to set factory default:
&%IDB_EDIT: OPTION 124:2:EXIT
Option Value IDB Value User IDB parameter
Disable 0OFF
Enable APO 1 APO
Enable Auto COR * 2COR
Disable STO 3STODIS
To Next Page
Loading...
