Lexmark X644E - Page 239

239Operations - TN5250E SETUP: SCS OPTIONS > PAPER SETTINGS > Page Length (IDB Opt. 82 & 83)
Parameter 2:
Value in inches [0.00 .. 45.51] or centimeters [0.00 ..
115.60] with 2 decimals
User IDB language to set factory default:
&%IDB_EDIT: PAGLNG I 11.70:EXIT
Advanced IDB language to set factory default:
&%IDB_EDIT: OPTION 82:208: OPTION 83:65:EXIT
The option values for option 82 and 83 are calculated using the for-
mulas below.
83: Reduce to nearest whole number.
82: Round off to
nearest whole number.
The values stored in option 82 and 83 for a page length of 11.70
inch are found like this:
83:
82:
NOTE: Inches can be converted to centimeters by multiplying with
0.3937 inch/cm.
Length inch 1440×
256
--------------------------------------------------
Length inch 1440×()256 Value stored in option 83×()–
11.70 1440×
256
----------------------------------
65≈
11.70 1440×()256 65×()– 208=