241Operations - TN5250E SETUP: SCS OPTIONS > PAPER SETTINGS > Page Width (IDB Opt.84 & 85)
Parameter 2:
Value in inches [0.00 .. 45.51] or centimeters [0.00 ..
115.60] with 2 decimals
User IDB language to set factory default:
&%IDB_EDIT: PAGWDT I 8.27:EXIT
Advanced IDB language to set factory default:
&%IDB_EDIT: OPTION 84:132: OPTION 85:46:EXIT
The option values for option 84 and 85 are calculated using the for-
mulas below.
85: Reduce to nearest whole number.
84: Round off to
nearest whole number.
The values stored in option 84 and 85 for a page width of 8.27 inch
are found like this:
85:
84:
NOTE: Inches can be converted to centimeters by multiplying with
0.3937 inch/cm.
Width inch 1440×
256
-----------------------------------------------
Width inch 1440×()256 Value stored in option 85×()–
8.27 1440×
256
-------------------------------
46≈
8.27 1440×()256 46×()– 132≈
To Next Page
Loading...
