Lexmark X644E - Page 42

42Mainframe Installation Setup: Task 3 -Configuring a Print Server
3 Set the TCP/IP option values shown in the table below.
Select Menus > Network/Ports > TCP/IP. You will need to
contact your network administrator for several of the values.
TCP/IP Option Value Description
Address Address available from your network
administrator.
Netmask Netmask for your network. Contact your network
administrator.
Gateway Address of the IP gateway. Contact your network
administrator.
Enable DHCP On or Off On, if you use a DHCP server.
Off, if you set the IP address another way.
Enable RARP On or Off On, if you use a RARP server.
Off, if you set the IP address another way.
Enable BOOTP On or Off On, if you use a BOOTP server.
Off, if you set the IP address another way.
Auto IP On or Off Default is On. This is the recommended setting
WINS Server
Address
Address of your WINS Server
DNS Server
Address
Address of your DNS Server