262
8-1. Phone operation (Hands-free system for cellular phones)
■ By keypad
1 Select “0-9” on the sub menu.
2 Enter the desired number.
■ By selecting “Release Tones”
“Release Tones” appear when a
continuous tone signal(s) containing a
(w) is registered in the contact list.
1 Select “Release Tones” on the
sub menu.
● A continuous tone signal is a character
string that consists of numbers and the
characters “p” or “w”. (e.g.
056133w0123p#1)
● When the “p” pause tone is used, the tone
data up until the next pause tone will be
automatically sent after 2 seconds have
elapsed. When the “w” pause tone is
used, the tone data up until the next
pause tone will be automatically sent
after a user operation is performed.
● Release tones can be used when auto-
mated operation of a phone based ser-
vice such as an answering machine or
bank phone service is desired. A phone
number with continuous tone signals can
be registered in the contact list.
● Tone data after a “w” pause tone can be
operated by voice command during a
call.
1 Select “Transmit Volume” on
the sub menu.
2 Select the desired level for the
transmit volume.
3 Press the button on the
Remote Touch to display previous
screen.
● The sound quality of the voice heard from
the other party’s speaker may be nega-
tively impacted.
● “Transmit Volume” is dimmed when
mute is on.
When a call is interrupted by a third
party while talking, the incoming
screen is displayed.
The incoming screen can also be dis-
played on the side display.
1 Select “Answer”/ or press the
switch on the steering wheel to
start talking with the other party.
To refuse to receive the call: Select
“Decline”/ or press the
switch on the steering wheel.
Each time the switch on the
steering wheel is pressed, the party
who is on hold will be switched.
● This function may not be available
depending on the type of Bluetooth
®
phone.
Sending tones Transmit volume setting
Incoming call waiting
To Next Page
Loading...
