Need help?Do you have a question about the LEYBOLD Turbo.Drive TD20 classic and is the answer not in the manual?
General| Brand | LEYBOLD |
|---|---|
| Model | Turbo.Drive TD20 classic |
| Category | Media Converter |
| Language | English |
Procedures to prevent hazards to persons and damage to the product.
Explains the converter's role in driving turbomolecular pumps.
Lists items included with the frequency converter.
Describes the front panel controls and status LEDs.
Covers electrical specs, pump speed ratings, and environmental data.
Lists part numbers for the converter and optional interfaces.
Lists available accessories like cables and mounting frames.
Guidance on positioning the converter for optimal operation.
Specifies compatible pump models and restrictions.
Instructions for connecting the unit to the pump and ground system.
Details the process of replacing older NT 20 units.
Pin assignments for the NT 20 adapter and comparison table.
Illustrates typical connections for the converter and pump.
Guidance on replacing older NT 151/361 or NT 361 units.
Procedures for powering on, self-test, and pump detection.
Overview of available communication interfaces (PLC, RS232, etc.).
Details the 9-way PLC interface functionality and pin assignments.
Specifications and connection for the RS 232 serial interface.
Information on the Profibus interface.
Specifications and connection for the RS 485 serial interface.
Illustrates the wiring for an RS 485 bus network.
Details the 25-way PLC interface pin assignments and functions.
Describes the functions of normal, fault, and optional relays.
Information on the DeviceNet communication interface.
Information on the Ethernet/IP communication interface.
Comprehensive list of configurable parameters for the converter.
Pump-specific parameters like frequency thresholds and temperatures.
Lists error codes, their LED indicators, and associated conditions.
Specific start-up sequence and LED indication for the TURBOVAC.
Describes normal operation, LED indicators, and status table.
Instructions for safely shutting down the TURBOVAC and the TD20 classic.
Information on converter maintenance, cleaning, and safety.
Addresses symptoms like noise, vibrations, and start failures with solutions.
Explains LED flash patterns for errors and their probable causes.
Statement of compliance with EU directives and harmonized standards.
Details testing against NRTL and SEMI standards.
To Next Page
