Installation
13
2.5 Replacing the NT 151/361 or NT 361
The Turbo.Drive TD20
classic
is capable of replacing the NT 151/361 and the
NT 361.
The connection for the power line cord is identical, an adjustment to the
mains voltage is no longer required. You can use the old power line cord.
The connection for the TURBOVAC is different. We recommend using a new
connection cable. If you want to use the old connection cable you need the
adapter cable 800 000 006.
Alternatively you may use the Turbo.Drive TD20
classic
version for pump con-
nection with DIN plug (compatible with the NT 361 pump connector).
POWER
DRIVE
REMOTE
X1
Fig. 2.6 Turbo.Drive TD20
classic
, version for version for pump connection with DIN plug
To Next Page
Loading...
Need help?
General
