LG ARX5000 User Manual

21Installation
Installation
3
Settings
Adjusting the Setup Settings
You can change the settings of the unit in the
[Setup] menu.
1. Press SETUP.
The [Setup] menu appears.
2. Use
U
/
u
to select the  rst setup option, and
press
i
to move to the second level.
3. Use
U
/
u
to select a second setup option,
and press ENTER ( ) to move to the third
level.
4. Use
U
/
u
to select a desired setting, and
press ENTER (
) to con rm your selection.
[Language] Menu
Menu Language
Select a language for the [Setup] menu and
on-screen display.
[Display] Menu
TV Aspect
Select which screen aspect to use based on
the shape of your TV screen.
[4:3]
Select when a standard 4:3 TV is connected.
[16:9]
Select when a 16:9 wide TV is connected.
Display Mode
The Display Mode setting works only when the
TV Aspect mode is set to 4:3.
[Letterbox]
Displays a wide picture with bands on the
upper and lower portions of the screen.
[Panscan]
Automatically displays the wide picture on
the entire screen and cuts o the portions
that do not  t.
Resolution
Sets the output resolution of the HDMI video
signal. Refer to “Resolution Setting” for details
about the resolution (page 16).
[Auto]
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution best
suited to the connected TV.

LG ARX5000 Specifications

General

Brand	LG
Model	ARX5000
Category	Receiver
Language	English