22 Installation
Installation
3
[576i]
Outputs 576 lines of interlaced video.
[576p]
Outputs 576 lines of progressive video.
[720p]
Outputs 720 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[1080p]
Outputs 1080 lines of progressive video.
[Audio] Menu
2.1 Speaker Setup
Make the following settings for the built-in 2.1
channel surround decoder.
1. Select [2.1 Speaker Setup] on the [Audio]
menu.
2. Press ENTER (
)
The [SPEAKER] menu appears.
3. Use
I
/
i
to select the desired speaker.
4. Adjust options using
U
/
u
/
I
/
i
buttons.
5. After adjusting the desired options, press
RETURN (
O
). The menu moves to the
previous screen.
[Speaker]
Select a speaker that you want to adjust.
NOTE
Certain speaker settings are prohibited by the
Dolby Digital licensing agreement.
[Size]
Since the speaker settings are xed, you
cannot change the settings.
[Volume]
Press
I
/
i
to adjust the output level of the
selected speaker.
- Front L/R : 0 ~ -5
- SubWoofer : 5 ~ -5
[Distance]
Adjust the distance between each speaker
and the listening position.
[Speaker Test Start]/ [Speaker Test Stop]
Select [Speaker Test Start] by using the
U
/
u
and press ENTER (
). Press ENTER ( )
again to stop. Adjust the volume to match
the volume of test signals memorized in the
system.
To Next Page
Loading...
Need help?
General
