50
CUSTOMIZING SETTINGS
Item Description
Monitor
Out
Selects one of the two connected RGB input videos as monitor
out.“Auto” mode outputs the “RGB1” or “RGB2” input that is currently
being displayed.
DivX(R)
VOD
Sets DivX-related settings.
Initial
Setting
Resets all projector settings to the factory default.
Set ID If the projector is connected to a PC through an RS-232C cable, you
can use the PC to control functions of the projector such as power On/
Off and input selection.
eZ-Net
Manager
Allows you to control one or more projectors easily through a local area
network.
Lamp Use
Time
Checks lamp usage time.
Self
Diagnosis
Troubleshoots functional problems that can arise while using
the product.
To Next Page
Loading...
