33
PROGRAMMING MODE - SETUP MODE
Entering set up
mode.
You will see LqC1
Button Display
Press the
90°C (194°F)
button.
Press the
75°C (167°F)
or the
60°C (140°F)
button until
appears in the display.
Press the
Start
button.
Press the
75°C (167°F)
or the
60°C (140°F)
button until
appears in the display.
Press the
Start
button.
Display previous special 75°C(167°F)/90°C(194°F) price.
Press
75°C (167°F)(+)
or
60°C (140°F)(-)
button to set
the special 75°C(167°F)/90°C(194°F) price.
(The vend price can be set from 0~10,00 in 0,1
increments.)
Press the
Start
button.
The machine sets up the special
75°C(167°F)/90°C(194°F) price, then advances to the
next process automatically.
If this function is restricted originally in program,
You can move to the next step by pushing the 60°C
(140°F) button.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the 90°C (194°F) button twice.
8. How to change special 75˚C(167˚F)/90˚C(194˚F) price
NOTE
• This function is not applied for opl type.
• Price setting varies by country.
• Set your country from mode. (Refer
How to enter the
)
• After EEPT, reset your country. (Default country is EUK)
To Next Page
Loading...
Need help?
General
