LG FH069FDFS User Manual

67
PROGRAMMING MODE - TEST MODE
Entering set up
mode.
You will see LqC1
Button Display
Press the
75°C (167°F)
or the
60°C (140°F)
button until
appears in the display.
Press the
Start
button.
The display will cycle through 2000 --> 0101 --> Sat -->
0000 repeatedly.
Press the
Start
button.
Press
75°C (167°F)(+)
or
60°C (140°F)(-)
button to select
year between 2000 and 2099.
Press the
Start
button.
The machine sets up the year, then advances to the
next process automatically.
Press
75°C (167°F)(+)
or
60°C (140°F)(-)
button to select
a month between 01 and 12.
Press the
Start
button.
The machine sets up the month, then advances to the
next process automatically.
Press
75°C (167°F)(+)
or
60°C (140°F)(-)
button to select
the day between 01 and 31.
Press the
Start
button.
The machine sets up the day, then advances to the next
process automatically.
Press
75°C (167°F)(+)
or
60°C (140°F)(-)
button to select
the hour between 00 and 23.
Press the
Start
button.
The machine sets up the hour, then advances to the
next process automatically.
Press
75°C (167°F)(+)
or
60°C (140°F)(-)
button to select
minute between 00 and 59.
Press the
Start
button.
The machine sets up the minute.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types – Push the Hot button three times.
3. Time set up
NOTE
• When the machine is switched off, Time setup is initialized.

LG FH069FDFS Specifications

General

Brand	LG
Model	FH069FDFS
Category	Washer
Language	English