66
PROGRAMMING MODE - TEST MODE
Entering set up
mode.
You will see LqC1
Button Display
Press the
75°C (167°F)
or the
60°C (140°F)
button until
appears in the display.
Press the
Start
button.
Press the
75°C (167°F)
button until appears in
the display.
Press the
Start
button, then factory reset is done.
is displayed.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the 90°C (194°F) button twice.
2. Factory reset -
After factory reset, machine information is changed to the default value.
NOTE
• Washing time 31 minutes
• Rinse cycle twice
• Top spin speed 1150 RPM
• Price setting varies by country
• Set your country from mode (Refer
How to enter the
)
• After EEPT, reset your country (Default country is EUK)
To Next Page
Loading...
Need help?
General
