48
PROGRAMMING MODE - SETUP MODE
NOTE
• If the temperature will be reached before the time set, the washing cycle will be stopped and
the time set will be changed the setting of after washing cycle.
Entering set up
mode.
You will see LqC1
Button Display
Press the
90°C (194°F)
button.
Press the
75°C (167°F)
or the
60°C (140°F)
button until
appears in the display.
Press the
Start
button.
Press the
75°C (167°F)
or the
60°C (140°F)
button until
appears in the display.
Press the
Start
button. Display . Press
75°C
(167°F)
or
60°C (140°F)
button to select course.
: 90°C (194°F) course
: 75°C (167°F) course
: 60°C (140°F) course
: 30°C (86°F)
,
40°C (104°F) course
: Cold course
Press the
Start
button.
Display previous wash time.
Press
75°C (167°F)(+)
or
60°C (140°F)(-)
button to select
wash time.
(Maximum 30 minutes, Minimum 0 minutes.)
Press the
Start
button.
The machine sets up the wash time, then advances to
the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the 90°C (194°F) button twice.
15. Washing time set up
Washing time setup can be used to set the time for the main wash.
To Next Page
Loading...
Need help?
General
