9
TABLE OF CONTENTS
TABLE OF CONTENTS
2 PRODUCT FEATURES
3 IMPORTANT SAFETY INSTRUCTIONS
5 BASIC SAFETY PRECAUTIONS
5 GROUNDING INSTRUCTIONS
6 SAFETY INSTRUCTIONS FOR INSTALLA-
TION
7 SAFETY INSTRUCTIONS FOR USE, CARE,
CLEANING, AND DISPOSAL
10 PARTS AND ACCESSORIES
10 Parts
10 Accessories
11 Control panel features
13
INSTALLATION INSTRUCTIONS
13 Checking and choosing the proper location
14 Unpacking and removing shipping bolts
15 Connecting the water lines
16 Connecting the drain line
17 Leveling the washing machine
18 PREPARATION
18 Precautions for fabric care before wash cycle
19 Fabric Care Labels
19 Sorting laundry
21 Loading the dispenser
22 OPERATING YOUR WASHER
23 PROGRAMMING MODE
24 Coin type -Structure of Programming mode
25 OPL type -Structure of Programming mode
26 Programming mode - Setup Mode
26 - 1. How to change regular price.
22 - 2. How to change regular cold price.
28 - 3. How to change regular 30˚C(86˚F)
40˚C(104˚F)/60˚C(140˚F) price
29 - 4. How to change regular
75˚C(167˚F)/90˚C(194˚F) price.
30 - 5. How to change special price
31 - 6. How to change special cold price
32 - 7. How to change special 30˚C(86˚F)
40˚C(104˚F)/60˚C(140˚F) price
33 - 8. How to change special
75˚C(167˚F)/90˚C(194˚F) price.
34 - 9. How to enter the
35 - 9-1. Special price day setup
36 - 9-2. Non-stop rinse
37 - 9-3. Vend type setup - coin type setup
38 - 9-4. Pre-wash set up
39 - 9-5. Twin spray set up
40 - 10. How to enter the
41 - 10-1. Pause function set up
42 - 10-2. Tub clean Load detection setup
43 - 11. How to enter the special price day
44 - 11-1. How to change to Sunday
45 - 12. Special price beginning time setup
46 - 13. Special price ending time setup
47 - 14. Prewash time setup
48 - 15. Washing time set up
49 - 16. Rinsing times per cycle
50 - 17. Rinsing time setup
51 - 18. Top spin speed – final spin time depends
on RPM
52 - 19. Value of coin 1
53 - 20. Value of coin 2
54 - 21. Penny increment pricing offset
55 - 22. How to change the water level
56 - 23. Beep volume
57 - 24. Time to keep the coin (Use only for coin
type)
58 - 25. How to setting drop count
59 - 26. How to set shut down time after UE
60 - 27.
How to
set
rinse spin enable
61 - 28.
How to set drop count for rinse spin
62 - 29. How to set auto dosing
63 - 30. How to enter the
64 - 31. How to set custom program
65 Programming Mode - Test mode
65 - 1.
66 - 2. Factory reset -
67 - 3. Time set up
68 - 4. Courtesy cycle
69 - 5. Cycle Kill
70 - 6. Password -
71 - 7. Tub clean -
72 Programming Mode - Collect mode
73 Collect Mode Data lists
74 MAINTENANCE
74 - Care after wash
74 - Storing the Washer
74 - Cleaning the Dispenser
75 - Cleaning the water inlet filters
76 - Cleaning the drain pump filter
77 - Clean the door seal
78 - Clean the drum, TUB CLEAN
78 ERROR MODE
79 POWER FAIL RECOVERY
79 DEFAULT WASHER SETTINGS
80 SPECIFICATIONS
To Next Page
Loading...
Need help?
General
